User guide - Parrot MINIKIT+ 15
The Parrot MINIKIT+ says
«Memory full»
You can pair up to ten devices. If you attempt to pair an eleventh phone, the kit
says «memory full». You must then clear the memory by holding down both the
red and green buttons for three seconds. Doing so also clears all the contacts.
The Parrot MINIKIT+ seems
to be frozen
In case of malfunction, you can reboot the Parrot MINIKIT+. To do so:
1. Press simultaneously the jog wheel
and the Reset button located at the
back of the Parrot MINIKIT+.
2. Release the Reset button. Then release
the jog wheel.
The kit does not seem to
work with my phone
Make sure your phone is compatible with the Parrot MINIKIT+. To do
so, refer to the compatibility list of the Parrot MINIKIT+ available on
our website.
If your phone is compatible with the Parrot MINIKIT+, make sure you
have the latest software version on your Parrot MINIKIT+. To find out
the software version of your Parrot MINIKIT+, check the name by which
it is seen by other Bluetooth devices. To find out the latest software
version available, download the update file and consult the update
procedure, refer to our website.
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
