User guide - Parrot MINIKIT+ 8
Once your phone is paired to the Parrot MINIKIT+, the connection between both
devices will be automatically established.
Note : Depending on the model of your phone, you may have to authorize the
connection to the Parrot MINIKIT+ to allow the automatic connection. Refer to
your phone user guide for more information.
Solving the memory
full problem
You can pair up to ten devices with the Parrot MINIKIT+. If you attempt to pair an
eleventh phone, the kit says «memory full». You must then clear the memory by holding
down both the red and green buttons for 3 seconds. Doing so also clears all the
contacts.
Using the Parrot MINIKIT+ with 2 phones
Dual mode allows you to simultaneously connect two phones to the Parrot MINIKIT+.
To activate dual mode :
1. Select Dual mode.
2. Press the jogwheel.
> The Parrot MINIKIT+ confirms the dual mode new status.
Note: Dual mode is deactivated by default.
Connecting 2 phones to
the Parrot MINIKIT+
When the Parrot MINIKIT+ is switched on, it attempts to connect to all paired
phones in the vehicle. If there are more than two paired phones in the vehicle, the
device connects to the two phones with the oldest pairing.
Main and secondary
phones
When two phones are connected to the Parrot MINIKIT+, one of them
becomes the main phone and the other is the secondary phone.
By default, the main phone is the one with the oldest pairing to the Parrot
MINIKIT+.
Making and receiving
calls
You can receive calls (manually or through voice recognition) from the main
or secondary phones. The Parrot MINIKIT+ ringtone varies according to the
phone receiving the call.
Only the phonebook of your main phone may be accessed through the
Parrot MINIKIT+. You can only make calls using your main phone. However
you can easily switch between the connected phones by holding down the
jogwheel for two seconds.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
