Using the Parrot MKi9000 with a USB peripheral
WARNING: If your Parrot MKi9000 is connected to an iPhone and an USB flash drive, the
iPhone has priority: you can only browse through your iPhone content.
1. Connect the USB flash drive or the MP3 player using the USB cable.
2. Press the jog wheel and select USB.
Using the Parrot MKi9000 with an audio player connected via Bluetooth
You can use the Parrot MKi9000 to listen to songs stored on your mobile
phone / PDA / smartphone. Your mobile phone must support the
Bluetooth® A2DP profile (Advanced Audio Distribution Profile).
If you are using a Bluetooth audio player for the 1st time, you
have to pair both devices.
► Refer to the Pairing a phone section.
If both devices are already paired :
1. Select Audio Bluetooth.
2. Start playing a song on your audio player.
Note : Volume for calls and for streaming audio work separately.
Using the Parrot MKi9000 with an analogue audio player
1. Connect your audio player to the Parrot MKi9000 using the Jack connector.
2. Press the jog wheel and select Line In.
3. Start playing a song on your audio player.
WARNING: The Next/Previous tracks functions are not available if the Parrot MKi9000 is
connected to the audio player via the Jack connector.
To Next Page
Loading...
Need help?
General
