Parrot ZIKMU SOLO User Guide

5Getting started
Getting started
.........................................................................................................................................................
Note : To make this guide easier to read, the iPod touch® and iPhone® (in music mode) shall be designated by the term "iPod" in
this manual. Compatible telephones or tablet PCs shall be designated by the term "Smartphone".
Positioning the Zikmu Solo
To install your Parrot Zikmu Solo, we recommend the following:
To ensure the low frequencies are reproduced accurately, leave a distance of at least 40 cm from rear or side walls.
Positioning near walls has the effect of increasing the level of the low frequencies.
When your Parrot Zikmu Solo is installed and working, download the Parrot Audio Suite App in order to define the
characteristics of the environment for the Parrot Zikmu Solo (dimensions of the room, distance away from walls). Refer
to the Settings section for more information.
Connection to mains supply
Plug the speaker into an electrical outlet using the provided power cable.
>The speaker turns on automatically. The icon blinks for a few seconds then becomes steady.

Parrot ZIKMU SOLO Specifications

General

Impedance	- Ω
Speaker type	-
Frequency range	- Hz
RMS rated power	100 W
Audio output channels	1.0 channels
Tweeter	Yes
Product color	White
Volume control	Digital
Equalizer	No
Apple docking compatibility	iPhone 3GS, iPhone 4, iPhone 4S, iPod Nano 2, iPod Nano 3, iPod Nano 4, iPod Nano 5, iPod Nano 6, iPod Touch 4, iPod Touch 5
Amplifier class	D
Compatible products	iPod, iPhone
Power source type	AC
Power consumption (typical)	115 W
Cables included	AC, Audio (3.5mm)

Weight and Dimensions

Weight	6200 g