8 Getting started
Lights
Note: The lights turn off automatically after 5 seconds without the need to press any button.
Wi-Fi network generated by the speaker
(SoloNET) available.
Connecting to the Wi-Fi network
Awaiting a WPS connection
Successfully connected to the Wi-Fi
network.
Speaker not visible via
Bluetooth
.
Speaker visible via
Bluetooth
.
Speaker connected via
Bluetooth
.
Ethernet interface not connected.
Point-to-point connection established.
Successfully connected to the Ethernet
network.
Selecting an audio source
The Parrot Zikmu Solo allows you to use several types of audio sources: computer connected via Wi-Fi, computer or
Smartphone connected via
Bluetooth
, iPod/iPhone, analogue audio player, TV or DVD player with an optical audio output.
Press the SOURCE button of the remote control to switch among the active audio sources.
If you start playing a music file from a second source, this source is automatically selected. The music currently played from
the first source is automatically suspended except if the first source is an analogue audio player connected via a Jack cable.
Controlling the volume
Mute the speaker / Stop the source*
* : This function marked with an asterisk is only available if you use the Parrot Zikmu Solo with controllable sources (iPod,
Bluetooth, UPnP, Samba).