2. Connect fuel joints securely and squeeze the primer pump with the outlet end up until you feel
it become firm (if equipped the fuel joint).
3. Place the gear shift lever in neutral.
NOTE:
The start-in-gear protection device prevents the engine from starting except when in neutral.
Attach the engine stop switch lanyard to secure place on your clothing, or your arm or leg. Then
install the lock plate on the other end of the lanyard into the engine stopswitch.
WARNING:
The engine must be starting in neutral otherwise damage starter and hazard can occur.
Do not attach the lanyard to clothing that could tear loose. Do not route the lanyard where it
11
To Next Page
Loading...
Need help?
General
