3. Loose the steering friction adjuster by turning it
counterclockwise, and adjust the steering friction
according to operator preference.
WARNING:
If there is too much resistance it could be
difficult to steer, which could result in an
accident.
For F25/20FW
1. Place the tilt lock lever in the lock position.
2. Slightly tilt the engine up until the tilt support bar is automatically released.
3. Slightly tilt the engine up until the tilt support bar is automatically released
2.13 Cruising in other conditions
2.13.1 Cruising in shallow water
The outboard motor can be tilted up partially to allow operation in shallow water.
WARNING:
Be sure to place the gear shift in neutral before cruising in shallow water or while tilting up the
outboard motor.
31
To Next Page
Loading...
Need help?
General
