3. Pull the fuel joint assembly out of the tank.
4. Clean the filter in a suitable cleaning solvent and allow it to dry.
5. Replace the gasket with a new one. Reinstall the fuel joint assembly and tighten the
screws firmly.
3.11 Checking and replacing anode(s)
Inspect the external anodes periodically. Remove scales from the surfaces of the anodes. Consult a
PARSUN dealer for replacement of external anodes.
CAUTION:
Do not paint anodes, as this would render them ineffective and can cause more rapid engine
corrosion.
3.12 Checking top cowling
Check the fitting of the top cowling by pushing it
with both hands. If it is loose have it repaired by your
PARSUN dealer.
42
To Next Page
Loading...
Need help?
General
