46
3.13 Maintenance Table
When utilized under normal condition, maintained and repaired in the proper manner, the motor can
work normally within the normal life period. The normal life of the engine is 350 hours or 10 years,
whichever occurs first.
Frequency of maintenance operations may be adjusted according to the operating conditions, but the
following table gives general guidelines.
The “
●” symbol indicates the check-ups which you may carry out by yourself.
The “
○” symbol indicates work to be carried out by your dealer.
Item Operations
Initial Every
10 hours
( 1 month )
50 hours
( 3 months )
100
hours
(6
months )
200
hours
( 1
year )
Anode(s) (external) Check/replacement
●
○ ●
○
Anode(s) (internal) Check/replacement
○
Cooling water passages Cleaning
● ●
Cowling clamp Check
●
Fuel filter (disposable) Check/cleaning
● ● ●
Fuel system Check
● ● ●
Fuel tank (portable tank) Check/cleaning
●
Gear oil Change
● ●
Greasing points Greasing
●
Idling speed Check/adjustment
●
○ ●
○
Propeller and cotter pin Check/replacement
● ●
To Next Page
Loading...
Need help?
General
