Parsun F40 BW-T-EFI User Manual

27
2.11 Trimming outboard motor
There are 4 or 5 holes provided in the clamp bracket to adjust the outboard motor trim angle.
1. Stop the engine.
2. Remove the trim rod from the clamp bracket while slightly tilting the outboard motor up.
3. Reposition the rod in the desired hole. Make test runs with the trim set to different angles to find the
position that works best for your boat and operating conditions.

Parsun F40 BW-T-EFI Specifications

General

Brand	Parsun
Model	F40 BW-T-EFI
Category	Outboard Motor
Language	English