40
3.6 Checking wiring and connectors
Check that each grounding wire is properly secured and each connector is engaged securely.
3.7 Checking for leakage
Check that no exhaust or water leaks from the joints between the exhaust cover, cylinder head and
body cylinder. Check for oil leaks on the around the engine.
CAUTION:
If any leaks are found, consult your dealer.
3.8 Checking propeller
WARNING：
Before inspecting, removing or installing the propeller, always take actions to ensure the
engine will not accidentally starts, such as removing the spark plug caps from the spark plugs,
placing the shift control in neutral, and removing the lanyard from the engine stop switch, etc.
Serious accident could occur if the engine starts when you are nearby.
Do not use your hand to hold the propeller when loosening or tightening the propeller nut. Put a
wood block between the anti-cavitation plate and the propeller to prevent the propeller from
turning.
To Next Page
Loading...
Need help?
General
