EasyManuals Logo

Parsun F40 BW-T-EFI User Manual

Parsun F40 BW-T-EFI
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
50
1. Lowest water level
2. Water surface
CAUTION:
If the fresh water level is below the level of the anti-cavitation plate, or if the water supply Is
insufficient, engine seizure may occur.
WARNING
Do not touch or remove electrical parts when starting or during the operation.
Keep hands, hair, and clothes away from the flywheel and other rotating parts while the
engine is running.
7. Run the engine at a fast idle for a few minutes in neutral position.
8. Before turning off the engine, quickly spray “Fogging Oil” into the carburetor or the fogging hole of
the silencer cover, if equipped.
9. If “Fogging Oil” is not available, run the engine at a speed higher than idle until the fuel in the fuel
system has run out and the engine stops. Remove the spark plug(s). Pour a teaspoonful of clean
engine oil into each cylinder. Rotate the flywheel several times by hand. Replace the spark plug(s).
10. Drain the fuel from the fuel tank and drain cooling water from the engine completely. Clean the
outboard motor body.
1
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parsun F40 BW-T-EFI and is the answer not in the manual?

Parsun F40 BW-T-EFI Specifications

General IconGeneral
BrandParsun
ModelF40 BW-T-EFI
CategoryOutboard Motor
LanguageEnglish

Related product manuals