4. Throttle friction adjuster
The throttle friction adjuster is on the tiller handle, which provides adjustable resistance to movement
of the throttle grip, and can be set according to operator preference. To increase resistance, turn the
adjuster clockwise. To decrease resistance, turn the adjuster counterclockwise. When constant speed is
desired, tighten the adjuster to maintain the desired throttle setting.
WARNING:
Do not over-tighten the friction adjuster. If there is too much resistance, it could be difficult
to move throttle lever or grip, which could result in an accident.
20
https://www.boat-manuals.com/
To Next Page
Loading...
