Parsun T40BM - Checking Wiring and Connectors; Checking for Leakage; Checking Propeller

3.5 Checking wiring and connectors
Check that each grounding wire is properly secured and each connector is engaged securely.
3.6 Checking for leakage
Check that no exhaust or water leaks from the joints between the exhaust cover, cylinder head, and body
cylinder.
Check for oil leaks on the around the engine.
CAUTION:
If any leaks are found, consult your PARSUN dealer.
3.7 Checking propeller
WARNING:
 Before inspecting, removing or installing the
propeller, always take actions to ensure the
engine will not accidentally starts, such
as removing the spark plug caps from the
spark plugs, placing the shift control in
neutral, and removing the lanyard from the
engine stop switch, etc.. Serious accident
could occur if the engine starts when you
are nearby.
40