Partner SP-820 - Getting Started with SP-820 POS Terminal

1
CHAPTER 1
GETTING STARTED
This chapter describes the procedures from unpacking the SP-820, to powering it on. The following topics are
described.
• Unpacking the machine on page 1
• Checking the package contents on page 2
• Identifying components on page 3
• Connecting peripheral devices on page 6
• Connecting a cash drawer on page 7
• Powering the machine on and off on page 8
Unpacking the machine
The machine and cable accessories are packed in a cardboard carton with foam padding for protection during
shipping.
Figure 1.1 Unpacking the
machine
Carefully unpack the machine and keep the packing materials. If you need to ship it in the future, repack it as
shown in Figure 1.1.
PE bag
Accessories box
EPE/L
EPE/R
Carton