Need help?Do you have a question about the Partner SP-800 and is the answer not in the manual?
General| RAM | 4GB DDR3L |
|---|---|
| Storage | 64GB SSD |
| Display | 15" TFT LCD |
| Resolution | 1024 x 768 |
| Operating System | Windows 10 IoT Enterprise |
| CPU | Intel Celeron J1900 |
| Processor | Intel Celeron J1900 |
| Memory | 4GB DDR3L |
| Connectivity | 1 x LAN |
| Operating Temperature | 0°C to 40°C |
| Ingress Protection | front panel |
| I/O Ports | 6 x USB, 4 x Serial, 1 x LAN |
Explains the purpose and capabilities of the BIOS Setup Utility for configuring system settings.
Guide on how to access the BIOS setup and use navigation keys for system configuration.
Covers advanced system configurations like IDE, USB, ACPI, MPS, Super IO, and Hardware Health.
Configuration settings for North Bridge and South Bridge chipsets, affecting system performance.
Managing system security through password protection and boot sector virus protection.
Steps for automatically installing drivers using a CD-ROM or USB drive.
Procedure for installing Intel Chipset Device Software for proper system configuration.
Guide to install Intel Extreme Graphics 2 drivers for enhanced display performance.
Instructions for installing the RealTek network driver for Windows XP/2000.
Steps for installing the TouchKit driver for the POS terminal's touchscreen functionality.
Procedure for calibrating the touchscreen using the TouchKit application for accurate input.
Essential safety guidelines and warnings to follow before and during FRU replacement.
Detailed instructions for removing and replacing the internal HDD of the SP-800.
To Next Page
