To Next PageTo Next PageWhy Paslode IM250A Li2 combustion chamber does not drop after tool cycles?
If the combustion chamber of your Paslode Nail Gun doesn't drop after the tool cycles, it could be because the No Mar Probe is bent or dirty. Clean the track or replace the No Mar Probe.
Explains how to use the manual and user responsibilities for safe operation.
Covers limited warranties, service promises, exclusions, and limitations for the cordless tool.
Explains the tool's main parts: handle, motor, and magazine assemblies.
Lists technical details like dimensions, weight, cycle rate, capacity, battery, and fuel.
Emphasizes wearing eye and ear protection for safe operation of the nailer.
Covers rules for tool handling, trigger control, maintenance, and avoiding misuse.
Warns of explosion/fire hazards associated with fuel cartridges and flammable environments.
Advises against exceeding 120°F (49°C) to prevent fuel/battery bursting.
Highlights the need for ventilation due to carbon monoxide exhaust from the tool.
Instructs to keep the tool, battery, and accessories away from children.
Covers checking for hidden hazards, maintaining footing, and keeping hands clear of work area.
Emphasizes using only qualified personnel and proper tool/fuel cartridge storage.
Provides instructions for proper disposal of lithium batteries according to regulations.
Explains the charging system and initial battery preparation steps for new batteries.
Details safety warnings, step-by-step charging, and prohibited actions during charging.
Provides estimated charging durations for new and discharged batteries.
Describes the tool's indicator light for battery status and its meanings.
Provides steps for installing and removing the battery from the tool safely.
Covers flammability, temperature hazards, and general handling precautions for fuel cartridges.
Explains how the cartridge works and mentions altitude restrictions affecting performance.
Advises on the recommended usage period for fuel cartridges for maximum performance.
Outlines guidelines for the proper disposal of fuel cells according to regulations.
Provides a step-by-step illustrated guide for inserting the fuel cartridge into the tool.
Details the correct fasteners and how to load them into the magazine.
Describes the function of the lockout feature to prevent blank firing and marring.
Provides instructions for using the nailer in hot and cold weather conditions.
Continues cold weather advice and warns about hot components like the No Mar Probe.
Covers moisture risks and carbon monoxide warnings for safe operation.
Explains how to adjust the nail depth setting for desired fastener seating.
Lists common uses for the finish nailer in various construction and trim applications.
Details fastener types, part numbers, lengths, and specific applications.
Lists checks and procedures the user can perform for basic maintenance.
Explains how to check fuel levels and battery charge for operational readiness.
Provides instructions for clearing jammed fasteners from the tool.
Step-by-step guide to clean the air filter for optimal tool performance.
Outlines tasks for daily tool care, cleaning, and proper storage after use.
Lists optional accessories available for enhancing the Paslode cordless nailer.
Addresses common problems with battery charging and the charger unit.
Solves issues related to the tool's fan not running or running slow.
Diagnoses problems with the No Mar Probe and the tool not cycling correctly.
Solves problems with fastener driving depth and follower engagement.
Addresses power loss, erratic behavior, and driver blade return issues.
Details the 2 Year Service Promise for tool repairs and maintenance.
Explains how to use the manual and user responsibilities for safe operation.
Covers limited warranties, service promises, exclusions, and limitations for the cordless tool.
Explains the tool's main parts: handle, motor, and magazine assemblies.
Lists technical details like dimensions, weight, cycle rate, capacity, battery, and fuel.
Emphasizes wearing eye and ear protection for safe operation of the nailer.
Covers rules for tool handling, trigger control, maintenance, and avoiding misuse.
Warns of explosion/fire hazards associated with fuel cartridges and flammable environments.
Advises against exceeding 120°F (49°C) to prevent fuel/battery bursting.
Highlights the need for ventilation due to carbon monoxide exhaust from the tool.
Instructs to keep the tool, battery, and accessories away from children.
Covers checking for hidden hazards, maintaining footing, and keeping hands clear of work area.
Emphasizes using only qualified personnel and proper tool/fuel cartridge storage.
Provides instructions for proper disposal of lithium batteries according to regulations.
Explains the charging system and initial battery preparation steps for new batteries.
Details safety warnings, step-by-step charging, and prohibited actions during charging.
Provides estimated charging durations for new and discharged batteries.
Describes the tool's indicator light for battery status and its meanings.
Provides steps for installing and removing the battery from the tool safely.
Covers flammability, temperature hazards, and general handling precautions for fuel cartridges.
Explains how the cartridge works and mentions altitude restrictions affecting performance.
Advises on the recommended usage period for fuel cartridges for maximum performance.
Outlines guidelines for the proper disposal of fuel cells according to regulations.
Provides a step-by-step illustrated guide for inserting the fuel cartridge into the tool.
Details the correct fasteners and how to load them into the magazine.
Describes the function of the lockout feature to prevent blank firing and marring.
Provides instructions for using the nailer in hot and cold weather conditions.
Continues cold weather advice and warns about hot components like the No Mar Probe.
Covers moisture risks and carbon monoxide warnings for safe operation.
Explains how to adjust the nail depth setting for desired fastener seating.
Lists common uses for the finish nailer in various construction and trim applications.
Details fastener types, part numbers, lengths, and specific applications.
Lists checks and procedures the user can perform for basic maintenance.
Explains how to check fuel levels and battery charge for operational readiness.
Provides instructions for clearing jammed fasteners from the tool.
Step-by-step guide to clean the air filter for optimal tool performance.
Outlines tasks for daily tool care, cleaning, and proper storage after use.
Lists optional accessories available for enhancing the Paslode cordless nailer.
Addresses common problems with battery charging and the charger unit.
Solves issues related to the tool's fan not running or running slow.
Diagnoses problems with the No Mar Probe and the tool not cycling correctly.
Solves problems with fastener driving depth and follower engagement.
Addresses power loss, erratic behavior, and driver blade return issues.
Details the 2 Year Service Promise for tool repairs and maintenance.
General| Power Source | Battery and Fuel Cell |
|---|---|
| Battery Type | Lithium-ion |
| Battery Voltage | 7.4V |
| Battery Capacity | 2.1 Ah |
| Nail Length Range | 1-1/2" to 2-1/2" |
| Charge Time | 1 hour |
| Fuel Cell Type | Paslode Fuel Cell |
| Magazine Capacity | 100 nails |
