Inline PSU Tester – User’s Guide Page 20
Driver Installation
Starting from Windows 10, the STSW-STM32102 driver is no more adequate and the
usage of the native inbox driver (Microsoft driver) is recommended. For other
operating systems please follow the below procedure.
Windows Installation (Win7 & Win10)
Step1 – connect the device
With the computer turned on and running, connect the PSU Tester to the USB port on
the computer to be tested. The device LCD should turn on and display the default
screen.
Step 2 – Install the device driver
Download the latest driver from the following address and extract the package.
https://www.passmark.com/products/psu-tester/download.php
The STSW-STM32102 software package contains four installation files based on the
various versions of the Microsoft® operating system. Run the setup file according to
the version of your operating system. E.g. run
‘CP_V1.5.0_Setup_W7_x64_64bits.exe’ if you have a 64-bit version of Windows 7
installed on your computer.
To Next Page
Loading...