© Hirschmann Rev. G 10/05/15 190166_G.DOCXG
Power Cable assembly (wiring harness) CAN bus from console (90° connector) to pressure
PART NO. 031-300-060-443 transducer block PART NO. 031-300-060-453
CAN bus from pressure transducer to angle sensor box (see below)
PART NO. 10968
16.2 PRESSURE TRANSDUCER BLOCK
DAV314/0014 PART NO. 044-314-060-014
Cutting ring for pressure transducers PART NO. 000-209-140-016
Hydraulic bulkhead adapter 9/16-18 JIC 37° x 16m x 1.5 PART NO. 000-214-600-093
To Next Page
Loading...
