What to do if stick electrode is sticking to the work piece with Paton MINI Welding System?
If the stick electrode is sticking to the workpiece when using the Paton Welding System, the arc current value might be too low. Try setting the arc current to a higher value.
Why does sporadic arc extinction occur during welding with Paton MINI Welding System?
If you experience sporadic arc extinction during welding with the Paton Welding System, the arc burning voltage might be too high for the machine. If possible, use other electrodes or another welding machine designed for higher voltage.
How to troubleshoot no arc current on Paton Welding System if the status indicator is off?
If the Paton Welding System shows no arc current, the mains switch is on, but the status indicator is not lit, first check the mains cable for any breaks. If the supply mains voltage is lower than 155 V or exceeds the permissible value, disconnect the machine and connect it to a mains with proper supply voltage. If none of these, the internal source supply unit may have failed, and you should contact a service facility.
Welding unit is intended exclusively for MMA welding; other uses are inappropriate.
Unit placement, protection from foreign particles/moisture, and cooling requirements are detailed.
Mains voltage requirements, grounding, and warranty implications of incorrect connection are detailed.
Guidance on connecting the mains plug to match supply voltage and current consumption.
Explains Hot-Start function, its advantages, and 33% current increase for better striking.
Details Arc Force benefits: stability, reduced sticking; increases current by 30%.
Describes Anti-Stick function; decreases current if electrode sticks, aiding separation.
Guidelines for storing the welding unit under specific conditions for up to 5 years.
Information on safely transporting the packed welding unit via any transport means.
Precautions regarding ventilation and avoiding harmful fumes during welding.
Safety measures to prevent fire and explosion hazards related to welding sparks.
Warnings about electric shock, magnetic fields, and cable integrity.
General precautions for keeping instructions accessible and following regulations.
Measures to prevent stray currents, like proper ground connection and placement.
Recommendation to check the unit weekly for external damage and safety unit operation.
General| Brand | Paton |
|---|---|
| Model | MINI |
| Category | Welding System |
| Language | English |
To Next Page
