4
4. Instructions
• Power On/Off: Power On: press and hold the Power button for 5 seconds until the IC
card slot LED illuminates, showing that the terminal is being turned on.
Power Off: press and hold the Power button for 3 seconds until the shutdown menu
appears, tap Power Off > Click Power Off, and “Shutting Down” will appear.
• Contactless Transactions: Tap a contactless enabled card or smartphone in proximity to
the top end of the terminal where the contactless sensor is located, indicated by the
contactless icon.
• Chip Card Transactions: With the card's chip facing upwards, insert the chip card fully
into the hybrid chip & magnetic card slot.
• Magnetic Stripe Transactions: With the card's magnetic stripe facing downwards, swipe
the card through the hybrid chip & magnetic reader at a constant speed, in either
direction.
• Paper Receipts: Tear off the receipt at a 45-degree angle to the paper cutter.
• Battery Charging: With a charging cable connected, the device's charging status shows
on the display.
5. General Usage Tips
• 1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty
environment.
• 2）Forbid non-professional to repair the terminal.
• 3）Before insert the card, please check internal and around of IC card slot. when
you found some suspicious objects , must report to related administrator.
• 4）a door or cover intended only for occasional use by the ordinary person, such
as for the installation of accessories, may be removable if an instructional
safeguard is provided for correct removal and reinstallation of the door or cover.
6. Important Safety Warning
• Do not place the terminal or battery in direct sunlight, nor in environments with
excessively high temperatures, smoke, dust, or dampness.
• Do not attempt to disassemble the battery, nor insert or use foreign objects to penetrate
the casing. Never place the battery in a fire or excessively hot surfaces. Take care not to
drop the battery. Excessive external shocks or pressure could cause battery liquid leakage
or result in the battery catching fire or even exploding. Keep the battery well away from
children and animals.
• Immediately replace any battery which appears to be deformed, expanded or in an
overheated state.
• We recommend you only use power adaptors supplied by PAX Technology. If you must
use 3
rd
party supplier accessories, please ensure specifications meet exactly those
recommended for our products, which must comply with international and local
To Next Page
Loading...
Need help?
General
