PAX S800 Manual

SP126194251-0217
System Settings
App Manager controls some system settings that can be applied over the whole terminal. Terminal needs to be
rebooted to apply changes.
DISPLAY
Brightness
Default setting is at 80% - to change the display screen brightness:
• Press CANCEL > FUNC (or MENU) > SYSTEM > DISPLAY > BRIGHTNESS
Colours
Default setting is black text on white background - to change the display screen
background colour between white and black
• Press CANCEL > FUNC (or MENU) > SYSTEM > DISPLAY > COLOURS
POWER OPTIONS
Screensaver
Default setting when enabled, is 30 seconds – to enable/disable screensaver and set
timeout period (set between 30 seconds and 180 seconds).
• Press CANCEL > FUNC (or MENU) > SYSTEM > POWER OPTIONS > SCREENSAVER
Do not enable screensaver if your terminal is being used with POS or ECR in integrated/
interfaced mode.
Sleep Timeout
Set time on S900 and S920 mobile units for terminal to go into low power consumption
mode (set between 1 second and 60 seconds).
• Press CANCEL > FUNC (or MENU) > SYSTEM > POWER OPTIONS > SLEEP TIMEOUT
Enabling Sleep Timeout will conserve battery when terminal is not in use. However, the unit
will require an additional few seconds to “wake” from Sleep mode.
KEY BEEPS
Enable or Disable key press noise.
• Press CANCEL > FUNC (or MENU) > SYSTEM > KEY BEEPS

PAX S800 Specifications

General

Brand	PAX
Model	S800
Category	Payment Terminal
Language	English