PaymentCloud LLC. • 800-988-2215 • support@paymentcloudinc.com
Table of Contents
Additional Information
5V.022025
PAX SP30
User Manual & Setup Guide
Spec Sheet
Shop PAX SP30
Accept Payments Cont.
Credit Card Return
Debit Card Return
How to Reprint Receipt
Note: Your PAX device must be paired with an auxiliary terminal
capable of reprinting receipts, such as the PAX A80. If your SP30 is
paired with such a terminal, proceed with the following steps:
1. Select a FUNCTION button on your paired terminal. On the
A80, this will be the device’s F or FUNC button.
2. From your auxiliary terminal’s home menu, select REPRINT.
3. Select LAST to print a receipt for the last transaction
processed.
4. Select ANY to search by TRANSACTION #, then press the
green ENTER key to proceed.
5. Select CUSTOMER or MERCHANT to print copies of either
customer or merchant receipts.
6. Press CANCEL to return to your SP30 home screen.
How to Process a Refund
1. From your paired terminal’s home screen, select REFUND.
2. Enter the total amount for the refund, then press the green
ENTER key to proceed.
3. Tap, swipe, or insert the card used in the original transaction to
initiate the refund.
4. Press the green ENTER key to conrm.
5. Press ENTER to print the customer receipt or CANCEL to skip.
1. From your paired terminal’s home screen, select REFUND.
2. Enter the total amount for the refund, then press the green
ENTER key to proceed.
3. Swipe or insert the card used in the original transaction to
initiate the refund.
4. Follow on-screen instructions for PIN input details. When
prompted, enter the PIN number on the SP30 PIN pad.
5. Press the green ENTER key to conrm.
6. Press ENTER to print the customer receipt or CANCEL to skip.
Accept Payments
4
Setup
3
Rights Reserved
9
Settings
7
Troubleshooting
& Tips
8
Overview
2
To Next Page
Loading...
