12 | P a g e
For other users this ability is not needed.
Export Access
Can this user update all the tables in the Gateway? In practice this means can the user use UPStart to
export to the Gateway?
Why enable this? The person who has the job of updating the UPB installation – for example to add
new or reconfigure existing devices - needs to have this ability.
Why not enable this? Users who only connect to the Gateway to control devices don’t need this ability.
Modify Schedule
Can this user update the schedule stored in the Gateway from UPStart or from any of the remote
applications?
Why enable this? Any user who wants to be able to adjust the time schedule should have this ability
enabled.
Why not enable this? If a user should be limited to only control of devices and make no modifications
then this option shouldn’t be enabled.
For installers, use of these abilities limit what the end-user can do. If the end-user shouldn’t be able to
update the IUPB network then disable the table write ability. But if you did want to let users update
the schedule then you can enable the schedule ability. For end-users who you want to give access for
control only and no ability to make any changes then don’t give them any abilities.
Tip: If your router supports it and are very concerned about security, you may want to investigate using
a Virtual Private Network (VPN). Establishing one and configuring for it is beyond the scope of this User
Guide or PCS Technical support. Contact people who specialize in networks.
To Next Page
Loading...
Need help?
General