17 | P a g e
Remote access using the application for Android
The PulseWorx application is available in the Google App Store (aka "Play Store"). After downloading
and installing, open the application.
Once the application starts you must first configure the Gateway connection. The three icons at the top
of the display are – left to right – Connect, Settings, and Help.
Tap on the Setting (wrench) icon and then "Gateway Settings” then on "Primary IP Address”. Enter the
IP address of the Gateway. Tap on "IP Port" and enter the Gateway port number. It should default to
2101.
In the Settings there are other options you may want to examine. There are two connection
configurations – primary and secondary and each have their own address, port, username, and
password.
The reason for having settings for two connections is best explained by an example. Let’s see how a
user called Bob uses the primary and secondary IP addresses.
When Bob is at home he accesses the Gateway from his tablet using wireless. The IP address of his
Gateway is always 192.168.2.100. It never changes. So he makes that his primary IP address. At home
with wireless on, the connection is made using this IP address.
To Next Page
Loading...
Need help?
General