26 | P a g e
Editing schedules
To edit the schedules press the “Schedule Edit” button in the “PulseWorx Gateway” ribbon Category in
UPStart. This dialog appears.
It is a good idea to assign better names than “Schedule A”, “Schedule B”, etc. These can be entered
into the schedule name entry at the top of each schedule tab. In this example the first schedule was
renamed to “At Home” and the second schedule to “Vacation”. The other two were left as is since they
aren’t used.
To create a schedule entry
To create a schedule entry press the “Add” button at the bottom of the dialog. The schedule entry
editor opens.