Peak 412A - Connecting Wire of Limit Switch on Cross Beam to Control Box

21
Male Terminal block
Male Terminal block
3. Connecting wire of limit switch on cross beam to control box (See Fig. 47).
Fig. 47
Connecting Black air
line ￠6×￠4 to Air
solenoid Valve
46
64
65
A/B Support Terminal
block for wire
○
2 Connect A/B Support
Terminal block with female
Terminal block
4
2
2
0
Female Terminal block
○
1 Take out Support
Terminal block
Schematic circuit diagram for
Cross beam limit switch wire
63
Cross beam Limit
switch wire and oil
return hose pass
through this hole
Male Terminal block
Tie the wires and
terminal blocks with
winding tapes