Peak PCAN-USB - Page 9

PCAN-USB Hub – User Manual
9
Note: If you have no internet connection, install the serial driver
for the device via the product DVD:
Drivers/PCAN-USB Hub Serial Drivers/Windows/CMD
v2.xx.xx WHQL Certified.exe.
2. Check the LED on the adapter. If the LEDs are red
, then the
driver was initialized successfully.
The Device Manager of Windows contains the following new
entries:
Ports (COM & LPT) > USB Serial Port (COMn
1
) and USB Serial
Port (COMn
1
)
CAN-USB-Hardware > PCAN-USB Device
Universal Serial Bus controllers > Generic USB Hub
Universal Serial Bus controllers > USB Serial Converter A
Universal Serial Bus controllers > USB Serial Converter A
Universal Serial Bus controllers > USB Composite Device
1
The port numbers for the COM ports may vary. If a COM port is occupied, the next
vacant port number is used. Changing the port number in the Device Manager:
Ports (COM & LPT) > USB Serial Port (COMn) > Properties > Port Settings >
Advanced