PeakTech 1007 - Page 10

10
Modulation Characteristics
a. AM Function
Modulation ratio
Source
Internal source
External source
Sine or Triangle
0% ~ 100%
Internal/External
400Hz/1000Hz Sine Wave
Max. 5.5Vpeak any waveform
b. FM Function
Frequency range
Peak deviation
Source
Internal source
External source
Sine, Suqare or Triangle
100mHz ~ 10KHz
4 ~ 5% of Max. frequency
Internal/External
400Hz/1000Hz Sine Wave
Max. 5.5Vpeak any waveform
c. FSK Function
Frequency range
Internal rate
Source
Sine, Square or Triangle
100mHz ~ 10MHz (P 1014)
100mHz ~ 20MHz (P 1016)
400Hz / 1000Hz
Internal / External
d. PSK Function
Frequency range
Phase setting
Internal rate
Source
Sine, Square or Triangle
100mHz ~ 10MHz (P 1014)
100mHz ~ 20MHz (P 1016)
0.0000 to 360.0 degree
400Hz / 1000Hz
Internal / External
Trigger/Gate Characteristics
a. Trigger Source
Main frequency setting
Manual (rotary push) / External
100mHz ~ 100KHz
b. Gate Source
Main frequency setting
Manual (rotary push) / External
100mHz ~ 10MHz (P 1014)
100mHz ~ 20MHz (P 1016)
Frequency Counter
a. Range 2Hz to 100MHz
b. Accuracy ±5 counts
c. Resolution 7 digits or (99.9999)
d. Low pass filter Manual activate
e. Timebase accuracy 50MHz ±25 ppm (23.5 ±5 ˚C) or TCXO optional
f. Input Attenuation 0dB, 20dB
g. Sensitivity 2Hz ~ 50MHz/-20dBm @ 50Ω typical
50MHz ~ 80MHz/-10dBm @ 50Ω typical
80MHz ~ 100MHz/-5dBm @ 50Ω typical
General Characteristics
a. Power Source AC 115V / 230V (on request) ±10%, 50Hz / 60Hz
b. Temperature 0ºC ~ 40ºC (Operation); -20ºC ~ 70ºC (Storage)
c. Relative Humidity up to 80%
d. Dimension 95mm (H) x 235mm (W) x 280mm(D)
e. Weight 3kg
f. Accessories AC power cord, operating manual