Peavey 4B - Technical Specifications

8
Output Power:
100 watts / 4 ohms
75 watts / 8 ohms
Aux SEND Output:
-10 dBv nominal, 1k ohms
Tape REC Output:
-10 dBv nominal, 1k ohms
Input lmpedance:
Low-Z Mic: 1k ohms
High-Z Line: 10k ohms
Tape Input: 10k ohms
Input Channel Equalization:
+/- 15 dB @ 5 kHz
Master Equalization:
Low: +/- 15 @ 60 Hz
Mid: +/-15 @ 1 kHz
High: +/- 15 @ 10 kHz
Protection Circuit:
Power on Mute delay time: 2 seconds
Power Consumption:
200 watts
Dimensions (HxWxD):
5 3/4" x 19 7/16" x 9 1/2"
14.6
cm x 49.4 cm x 24.1 cm
Weight:
18 lbs. (8.2 kg)
PVi
™
4B
SPECIFICATIONS
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
13 August 2005