Peavey DPM C8 - Keyboard Range Settings; Keyboard Range Controller Assignment; Range Muting.17

Note: The Bank Select MSB is shown as a fourth parameter anytime the Bank Select is turned ON (the first
number on the screen is the LSB). Some companies use the MSB (MIDI controller *0) for a bank
number rather than the LSB (MIDI controller #32). This allows for proper interfacing regardless of
which method is used.
The RESEND button is provided to allow repeated transmissions of the same Bank and Program.
'fhe parameters on this screen are global (not saved within the preset). Your settings are memorized, so you
don’t need to set them every time you power up.
2.1 Keyboard Range Settings
Press the Ranges soft button and refer to section 2B.
2.2 Keyboard Range Controller Assignment
Press the CtlAsgn soft button and refer to section 2C.
2.3 Range Muting
There are three methods of muting/unmuting ranges:
Note: To save the Preset mute status, you must save the Preset (see section 2d). Changing to a different preset
will cancel your edits.
Method 1
1. Press and hold the Mute soft button.
2. Toggle individual ranges ON (unmuted) or OFF (muted) with the corresponding number buttons (1-8),
as indicated by the presence or absence of a keyboard icon.
3. Release the Mute soft button.
Method 2
1. Use the left/right directional buttons to move the range cursor to the range you want to mute or unmute.
2. Press the Mute soft button and release it without pressing any numerical buttons.
Note: Tile cursor position is saved with the preset so you can, for example, have a preset come Lip with
Range #5 highlighted to make it immediately ready for muting (unmuting).
Method 3
1. Program one (or both) of the programmable footswitches to Range Mute Status (Toggle) or Range Mute
Status (Hold). See section 2.l6 for more information.