Peavey DPM C8 - Page 4

2.12f Low Range.^
2.12g Keyboard Velocity Monitor.22
2.12h Accessing Oilier Pages. 2 2
SECTION 2C PRESET, CONTROL ASSIGN SCREEN.23
2.13 Wheel and Pressure Assignment.23
2.13a Parameter Assignment.23
2.13b Polarity Assignment.23
2.13c Save Preset.24
2.14 Slider Assignment.24
2.14a Parameter Assignment.24
2.14b Polarity Assignment.24
2.14c Save Preset.24
2.15 Button Assignment.25
2.15a Parameter Assignment.25
2.15b Save Preset.25
2.16 Footswitch and C.V Pedal Assignment.25
2.16a Parameter Assignment.26
2.16b Polarity Assignment.26
2.16c Program Chain Up/Down Footswitches.26
2.l6d Save Preset.26
SECTION 2D PRESET, SAVE PRESET SCREEN.27
2.17 Selecting the Destination Preset Number.27
2.18 Naming the Destination Preset.27
2.19 Canceling and Saving.27
2.20 Accessing Other Pages. 2 7
Chapter 3 MIDI Operations . 28
SECTION 3A MIDI, MAIN SCREEN.28
3.0 ProgChg In Channel.28
3.1 MIDI ProgChg In Buss.28
3.2 SysEx ID Number.28
3.3 Global Transpose.28
3.4 MIDI Merge Functions.28
3.5 MIDI Bulk Dump Functions (C8 only).28
SECTION 3B MIDI, MERGE SCREEN.29
3.5 Merge to Output Buss.29
3.6 Channelization.29
3.7 Transpose.29
3.8 Merge —> Range.29
3.9 MIDI Data Filter. 3 0
3.10 Accessing Other Pages.30
SECTION 3C MIDI, BULK DUMP SCREEN (C 8 ONLY).31
3.11 Receive SysEx via MIDI.31
3.12 Save To Disk (C8 only).31
3.13 Load From Disk (C 8 only).32
3.14 Send SysEx Data in Buffer Through MIDI Out.32
3.15 Clear SysEx Buffer.33