Chapter 5 - Setting up the NION
42 Version 1.6.4b.1 June 11, 2012
Note: Care should be taken when choosing DHCP rather than static. DHCP mode is
provided on the NION machine as a convenience when using NioNodes in informal
settings, such as when you are experimenting. Static IP addresses should always be used
when NioNodes are deployed in production systems. DHCP-obtained IP addresses depend
on a lease to be maintained by the DHCP server in order to keep an assigned IP address. If
the IP address is allowed to expire there is a chance that the IP address assigned to one or
mode NioNodes could be lost, changes or reassigned, resulting in the lost of control audio
from a NION project.
6. Once the network configuration page has been completed, reboot the NION:
a) Click the Special tab.
To Next Page
Loading...
