Peavey PV 10AT User Manual

PV
®
10AT & PV
®
10BT Series Specications
Inputs
Function Input Z
(ohms min)
Input Gain
Setting Min** Nominal* Max
Bal/
Unbal
Connector
Microphone
(150 ohms)
2 kΩ Max Gain
(59 dB)
Min Gain
(4 dB)
-71 dBu
-17 dBu
-51 dBu
+5 dBu
-39 dBu
+16 dBu
Bal XLR Pin 1 Gnd
Pin 2 (+)
Pin 3 (-)
Line
(10 k ohms)
Line 4 TS, GTR
SHAPE ON
10 kΩ
1 Meg Ω @ ≤ 200
Hz, like 12AX7
input.
Max Gain
(40 dB)
Min Gain
(-15 dB)
-52 dBu
+2 dBu
-32 dBu
+23 dBu
-20 dBu
> +32 dBu
Bal 1/4" TRS;
Tip (+)
Ring (-)
Sleeve Ground
Stereo Input 5/6
Stereo Input 9/10
10 kΩ
6.8 kΩ
Max Gain (18 dB)
Nominal
Max Gain ( 18 dB)
Nominal
-31 dBu
-13 dBu
-23 dBu
-15 dBu
-12 dBu
+6 dBu
-13 dBu
-5 dBu
+1 dBu
+19 dBu
+3dBu
+12 dBu
Unbal 1/4" TS;
Tip (+)
Sleeve Ground
3.5mm, RCA
2.8 kΩ
Max Gain (18 dB)
Nominal
-43 dBu
-24 dBu
-23 dBV
-5 dBu
-10 dBu
+8 dBu
Unbal 3.5mm; Tip=L, Ring
= R,
Sleeve Ground
RCA: Tip (+),
Sleeve Ground
Input Levels
0 dBu=0.775 V (RMS)
** Min Input Level (sensitivity) is the smallest signal that will produce nominal output (+4 dBu) with channel and
master faders set for maximum gain.
* Nominal settings are dened as all controls set at 0 dB (or 50% rotation for rotary pots) except the gain adjustment
pot which is as specied.
Outputs
Function Min Load
Z
(ohms)
Nominal Max
Bal/
Unbal
Connector
Main Left/Right 600 +4 dBu
+20 dBu
Bal XLR Pin Ground Tip
Pin 2 (+), Pin 3 (-)
1/4" TRS: Tip (+), Ring (-)
Sleeve Ground
Eects and
Monitor Sends
600 +4 dBu
+20 dBu
Bal 1/4" TRS: Tip (+), Ring (-)
Sleeve Ground
Control Room 600 +4 dBu
+20 dBu Unbal RCA: Tip (+),
Sleeve Ground
Headphone 8 +4 dBu (no load)
+20 dBu
Unbal 1/4" TRS; Tip Left, Ring Right
Sleeve Ground
Output Levels
0 dBu=0.775 V (RMS)
Mic pre EIN = -126 dBu @ max gain with 150 ohm source

Peavey PV 10AT Specifications

General

Brand	Peavey
Model	PV 10AT
Category	Music Mixer
Language	English