Crosstalk/Attenuation
Dimensions
Meters
Weight
Signal/Overload Indicators
Power Requirements
Common Mode Rejection Ratio (Mic Input)
Adjacent Input Channels (1 kHz) >90 dB Mute Button Attenuation (1 kHz) >90 dB
Left to Right Outputs (1 kHz) >70 dB Channel Fader Kill (1 kHz) >85 dB
12.75" wide x 15.1" deep x 2.1875" high
(32.39 cm x 38.35 cm x 5.56 cm)
PV10BT: 8.22 lbs (3.73 kg) 100-240 VAC 50/60 Hz 15 Watts
PV10AT: 8.26 lbs (3.75 kg)
6 segment, peak reading (0 db = +4 dBu) Red LED lights 5 dB below clipping
50 dB minimum (20 Hz to 20 kHz)
70 dB typical @ 1 kHz
To Next Page
Loading...
Need help?
General
