Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http：//www.pecron.com Tel：0755-28601668
② AC output or appliance circuit
③ The internal temperature of power station is too high
④ The internal battery voltage is too low
6.2 How To Operation：
Step 1:Lightly press “ON/OFF”,after the power is on,press “AC ON/OFF” and
hold for 1 second,at this time,the AC output is on.
Step 2:Check whether the load input voltage and frequency correspond.
Step 3:Check the load power and make sure it does not exceed the amount of this
power supply.
Step 4:Plug the device into this AC outlet and turn on the load switch
Step 5:After using the power station,please lightly press the ON/OFF to shut down.
Step 6:If the power of the power supply is exhausted or insufficient at this time,
please charge the power supply in time for the next use!
To Next Page
Loading...
