Shenzhen Pecron Technology Co.,Ltd
POWER IT POSSIBLE
Shenzhen Pecron Technology Co.,Ltd http://www.pecron.com Tel:0755-28601668
6.3 How To Charge:
You can use the following methods to charge the power station:
(1) Use our standard power adapter to charge the power station:Please connect
the power cord with the adapter,and connect to the power station input port,then
plug to the grid,start to charge.
+ =
Adapter
(2) Use solar panel to charge:Use the solar cable to connect to the solar
panel,and the other side connect to the input port,start to charge(Solar panel max
voltage can’t over 40V,min voltage not lower than 29.4V).
( 3 ) Use car adapter to charge:when you use car charging,after you start up the
car,and then just insert the cigar connector to the car cigar port,the other side
connect to the power station input port.When the car is not on start up status,please
don’t use car charge.
Notes:
① Our S1500 standard power adapter only use in our S1500, please don’t use in other
device and keep away from rain.
②When you use car charge and solar charge,please pay attention to the positive and
negative.