24
2• Rotate the handle forward towards
the car seat backrest as shown in the
figure.The correct forward position is
reached when it clicks into position.
Any other position may injure your
baby in an accident.
To rotate the handlebar, press each
of the round buttons (located on
each side of the handle where it
attaches to the seat) and rotate it to
the position required.
3• To remove the car seat, move the
handle to the upright position. Place
your hand on the top of the seat
back and pull up on the handle with
your fingers.
Note: Pulling near the center of the
handle provides the easiest release.
To Next Page
Loading...
