1• Torefitthepadding:
• Slide on the padding;
• Insert the four padding fixing wings
on the edge of the safety seat;
• Reposition the harness adjuster
button cover in the centre of the
safety chair and engage it from
under the chair;
• Position the two side guide covers
for the car seat belt with the slots
facing the inside of the safety seat
and check that they are correctly
engaged in position.
2• Torefittheheadrestandcover:
• From the back of the safety seat
insert the headrest height adjuster
in the lowest hole and from
the front align and engage the
headrest with this, ensuring that
the teeth are correctly engaged
How to Wash the Chair Padding - Refitting
44
To Next Page
Loading...
Need help?
General
