19
Installing the Base with Different Types of Seat Belts
Primo Viaggio Sip is designed for use
with lap or lap/shoulder seat belts. Four
of the most common types are listed
below. Please read your vehicle manual
for instructions on installing an infant
car seat using your vehicle seat belts.
I Lap/Shoulder belt with
Switchable Locking Retractor
If your vehicle has Switchable
Locking Retractor lap/shoulder belts,
pull the shoulder strap all the way
out, let it retract several inches, then
pull it out again. It should lock in
place to properly secure the base.
II Lap/Shoulder belt with
Emergency Locking Retractor
(ELR) and free sliding latch plate
This type of seat belt will only lock in
an emergency, so you must use the
locking clip (stored on infant seat
To Next Page
Loading...
