• Unscrew the two headrest screws
with a screwdriver, press the teeth
on the slots and pull the headrest to
release it.
3• Toremovethepadding:
• Slide off the four padding fixing tabs
from the edge of the safety seat;
• Remove the two side guide covers
for the car seat belt;
• Remove the harness adjuster button
cover in the centre of the safety seat,
releasing it from under the seat;
• Remove the padding.
Padding cleaning instructions
• hand wash at max 86° F (30° C),
do not wring;
• do not iron;
• do not bleach with chlorine;
• do not dry clean, do not use
solvent based stain removers;
• do not tumble dry.
To Next Page
Loading...
