28
How to Buckle Your Baby into the Car Seat
This restraint uses a 5-point harness
system to secure your baby into the car
seat. See illustration on page 8.
1• Push the red buckle button to
release the harness. Press and hold
the harness adjuster button while
pulling the shoulder straps out. Lay
the shoulder straps to the side to
make room for your baby.
2• Put your baby in the car seat with
their bottom and back flat against
the infant restraint. Bring the two
shoulder straps over your baby’s
shoulders. Make sure the straps are
not twisted behind the backrest or
over your baby’s chest.
To Next Page
Loading...
