6
accident statistics, infants are safer
when properly restrained in the rear
seating positions than in the front
seating positions.
• Install this car seat on front facing
vehicle seats only. Do not use on
rear facing or side facing seats or in
seating positions equipped with door-
mounted or motorized shoulder belts.
• If you use a lap belt or lap/shoulder
belt to install the base, you must use a
seat belt that locks in place. If it does
not lock in place, use the locking clip.
The seat belt must lock into place for
the car seat to be properly secured.
• Be sure the car seat or car seat base
are properly secured using a vehicle
seat belt or the lower universal
anchorage system (UAS) hereinafter
referred to as LATCH (Lower
Anchorages and Tether for infants).
• Always buckle your baby into the
car seat with the harness. Be sure to
latch buckles correctly.
• When lifting the seat out of the base,
be sure you first secure the handle
into the carrying position.
•
Keep fingers away from moving parts.
• Use only approved parts. Use of
unapproved parts can affect the
safety of the car seat and cause
serious injury or death in an accident.
• Complete and send in the
registration form right away.
• Always store the manual with car
seat. Keep it in the pocket on front of
base.
• In case of accident: if this car seat is
involved in a car accident, it may be
no longer safe to use. You may need
to get a new unit. Call customer
service at 1-800-661-5050 (toll free)
for more information.
• Do not use Primo Viaggio SIP with
bases manufactured before July
2006.
To Next Page
Loading...
Need help?
General
