PELLENC POWER TOOLS BATTERY 150
56_158889-A
11.5. "EU" DECLARATION OF CONFORMITY: CHARGER CB5004HV2
MANUFACTURER/ENTITY AUTHORISED TO COMPILE
THE TECHNICAL FILE
PELLENC
ADDRESS Quartier Notre-Dame - 84120 Pertuis (France)
We hereby declare that the machine referred to below as:
GENERIC DENOMINATION BATTERY CHARGER
FUNCTION Designed to charge Pellenc tool batteries
COMMERCIAL NAME CB
TYPE 0.4 A
MODEL CB5004HV2
26V00001 - 26V49999 26W00001 - 26W49999 26X00001 - 26X49999
32V00001 - 32V49999 32W00001 - 32W49999 32X00001 - 32X49999
SERIAL No.
56V00001 - 56V49999 56W00001 - 56W49999 56X00001 - 56X49999
Complies with the relevant provisions of the low voltage directive 2014/35/EC.
Complies with the provisions of the following European Directives:
• 2014/30/EU EMC Directive; 2011/65/EU ROHS Directive; 1907/2006 REACH Regulation; 2012/19/EU WEEE
Directive
The following harmonised European standards have been used in part or in full:
• EN 60335-1:2012 / A13:2017 ; EN 60335-2-29:2004/A11:2018 ; EN 62233:2008 ; EN 55014-1:2017 ; EN
55014-2:2015 ; EN 61000-3-2:2019 ; EN 61000-3-3:2013/A1:2019
SIGNED IN PERTUIS, DATED 15/10/2021
JEAN-MARC GIALIS
CHIEF EXECUTIVE OFFICER
30
To Next Page
Loading...
