pellenc Excelion 2000 PROFESSIONAL - Adjusting the Working Position; Adjusting the Orientation of the Handlebar

13
53_12_014B
53_12_017B
53_12_015B
53_12_016B
A
B
C
D
PREPARING THE MACHINE FOR USE
ADJUSTING THE WORKING POSITION
Before using the Excelion 2000 Professional brush cutter, its working position must be adjusted to the operator's size. This makes
it easier for the operator to use and requires little effort.
Adjusting the machine's working position to the operator's size is a 3-step process:
- adjusting the orientation of the handlebar,
- installing and adjusting the harness,
- balancing the machine.
These various adjustments are repeated until the brush cutter is in a suitable working position.
These operations help adjust the position of the handlebar to the shape of the user. Users must not work with their arms stretched
out or completely bent.
ADJUSTING THE ORIENTATION OF THE HANDLEBAR
Take the time to properly adjust your harness and machine. This will guarantee your usage comfort and prevent any
discomfort.