pellenc Excelion 2000 PROFESSIONAL - Safety Equipment; Safety Indications

8
1 5
2 6
3
7
4
8
53_12_006C
1
3
2
4
5
6
7
8
9
10
SAFETY MEASURES
SAFETY EQUIPMENT
SAFETY INSTRUCTIONS
Protective equipment Wearing is
1 Helmet Mandatory
2 Visor Mandatory
3 Hard-wearing gloves Mandatory
4 Safety footwear Mandatory
5 Ear protection Mandatory
6 Safety goggles Mandatory
7 Safety jacket or over-sleeves Recommended/advised
8 Work trousers RMandatory
SAFETY INDICATIONS
1– Noise Levels
Sound power 93 dB
2– Read the user manual
Read the instructions carefully and observe the safety precautions.
3– It is mandatory to wear safety goggles.
Pellenc recommends wearing a protective visor for the face and an approved safety helmet.
4– Gloves, safety pants and safety shoes must be worn
5– Maintaining an adequate safety distance
Be sure to maintain an adequate safety distance of 15 m and ensure that there are no people (especially children) or animal in the
working area of the machine.
Stop the machine immediately if a person or animal approaches.
6– Direction of rotation and maximum speed (6200 rpm)
Pay attention to the direction of rotation of the Excelion 2000 Professional brush cutter. This is indicated on the safety guard.
7– Pay attention to projections
8– Beware of kickback
Avoid all contact between the blade and solid objects.
9– Risk of burns
Do not touch the engine crankcase and the radiator of the electronic motor control board either during or after use of the machine.
10– Do not expose to or work in the rain.