pellenc Excelion 2000 PROFESSIONAL - Angle Transmission Lubrication

30
1
2
3
4
53_12_038C
53_12_053B
MAINTENANCE
Safety elements:
SPARE PARTS AND CONSUMABLES REFERENCES
ANGLE TRANSMISSION LUBRICATION
- Grease tube = 35749
- Loosen the screw located on the angle transmission using the
adjusting wrench.
- Open the tube of PELLENC grease
- Apply 4g of PELLENC grease, once a month or every 100 hours.
- Grease the threads of the shaft of the angle to facilitate the release
of the cutting head nuts.
1– Standard housing, ref. 107533
2– Grinding chamber, ref. 111600
3– Chisel-tooth saw housing, ref. 111500
4– CityCut housing, ref. 118267
- For specic lubrication of the angle transmission of the CITY CUT
cutting head, refer to the heading "Greasing" on p. 37.