1
2
3
4
5
6
7
8
9
10
11
12
DESCRIPTION AND TECHNICAL CHARACTERISTICS
Description of the main elements:
WARNING:
Before working on the tool, check that the On / Off switch is in the off position «0»
and disconnect the battery power lead.
The Excelion 2000 Professional brush cutter is supplied without a cutting head:
They must be ordered independently.
1– Crankcase: Protects the electric motor and allows heat to dissipate.
2– Grip: Used to guide the Excelion 2000 Professional brush cutter
3– Power cord: Connects the machine to the Pellenc power tool battery.
4– Carrying plate: Used to hang the tool using a harness.
5– Electronic control board of the motor and its radiator: Protects the electronic control board and allows heat to dissipate.
6– Handlebar adjustment knob: Used to adjust the angle of the handlebar and put the tool in its transport position.
7– Safety trigger: Prevents inadvertent activation of the control trigger; the safety trigger must be activated prior to activating the
control trigger.
8– Control trigger: Activates the rotation of the cutting tool according to a progressively adjustable speed.
9– Drive tube
10– Safety guard: Limits the risk of the operator being hit by ying objects (stones, bits of metal). A blade attached to the safety
guard makes it possible to obtain the correct length for the cutting wires.
11– Angle transmission
12– Harness
To Next Page
Loading...
