pellenc Excelion 2000 PROFESSIONAL - Battery Autonomy and Working Efficiency

17
53_12_054A
To optimise the autonomy of your PELLENC battery tool, the rotational speed of the cutting tool used must be adapted to the type
of mowing operation required.
The higher the rotational speed of the cutting tool is, the higher the energy consumption. Therefore the progressive nature of the
control trigger must be used to adjust the rotational speed of the cutting tool.
USAGE
BATTERY AUTONOMY AND WORKING EFFICIENCY
Type of Vegetation or operation Cutting tool recommended Rotational speed recommended
Edges PELLENC wire Ø 2.4 mm 2,000 rpm (eco mode)
Lawn PELLENC wire Ø 2.4 mm 2,000 rpm (eco mode)
Grass PELLENC wire Ø 3 mm 3000 rpm (eco mode)
Dense and tall grass PELLENC wire Ø 3 mm 6200 rpm
Tall and dense scrub brush Twin-blade 3000 rpm (eco mode)
Woody plants 8-toothed blade 3000 rpm (eco mode)
Brambles, plant regrowths, shrubs Mulching blade 6200 rpm
Thinning Chisel-tooth saw 3000 rpm (eco mode)
Minimum speed
Minimum stroke
2000 rpm
Stop
Trigger released
Average speed
50% of the stroke
3000 rpm
Maximum speed
100% of the stroke
6,200 rpm