pellenc Excelion 2000 PROFESSIONAL - Page 29

29
MAINTENANCE REMARK: Have the machine overhauled every 400 operating hours or once a year at least by an approved Pellenc dealer. Always store the machine clean and in a dry enclosure with the battery charged.
Every year or as
necessary
X X X X X
After use
X X
Monthly
X X
Every two hours
X X X
After starting up
X X X X X X X
Maintenance task Cleaning the Excelion 2000 Professional brush cutter (no high-pressure cleaner but by blasting or brushing) Visual verication of the machine's safety devices (carrying plate, safety guard, angle transmission) Verication of the functioning of the trigger safety Sharpening verication and re-sharpening if necessary Visual inspection of the cutting tool (absence of cracks or distortion) Visual inspection of the cutting tool's attachment to the shaft (absence of distortion or wear and tear) Verication of the wear and tear of the notched cam teeth and sharpening if necessary or replacement of the notched cam Battery level verication Machine check by an approved Pellenc dealer Angle transmission lubrication